Mounts / Rails for your HOLOSUN®

HOLOSUN High Mount AACW1.4 for 403R The HOLOSUN mounts stand out due to easy handling. The low mount is suitable for weapons with conventional shanks, where the shoulder rest is lower than the system box of the weapon. The mount impresses with a low height and an extreme robust duralumin construction. It is suitable for all firearms with a Picatinny / Weaver rail. Adjustment and fixing of the mount on the rail can be accomplished with the Torx bolt. The mount HS-HIGH-MOUNT-AACW1.4 is ideal for Micro sights and is compatible with the following Holosun Micro Red Dots: HS403R high repeat accuracy robust & light low construction height fast installation with Torx bolt AACW1.4 Main Data EAN: 4055132014858 customs tarif number: 85394900000 Technical Parameters Operating Temperature: -30°C - 60 °C Storage Temperature: -40°C - 70 °C Mechanical Parameters Size: 30x50x29 mm Material: aluminium Housing Color: black Weight: 40 g HS-HIGH-MOUNT-403R auf Amazon kaufen

HOLOSUN High Mount FDE für all almost Micro Models The HOLOSUN mounts stand out due to easy handling. The low mount is suitable for weapons with conventional shanks, where the shoulder rest is lower than the system box of the weapon. The mount impresses with a low height and an extreme robust duralumin construction. It is suitable for all firearms with a Picatinny / Weaver rail. Adjustment and fixing of the mount on the rail can be accomplished with the Torx bolt. The mount HS-HIGH-MOUNT-FDE is ideal for Micro sights and is compatible with the following Holosun Micro Red Dots: HS403B/C/GL + HS503CU/GU/FL + HS515CM/GM FDE high repeat accuracy robust & light low construction height fast installation with Torx bolt Colour: FDE Main Data EAN: 4055132012281 customs tarif number: 85394900000 Technical Parameters Operating Temperature: -30°C - 60 °C Storage Temperature: -40°C - 70 °C Mechanical Parameters Size: 30x40x35 mm Material: aluminium Housing Color: Flat Dark Earth Weight: 44 g

HOLOSUN high riser mount for micro reflex sights The HOLOSUN mounts stand out due to easy handling. The high mount is suitable for weapons with straight shanks, where the shoulder rest is on the same height as the system box of the weapon. The mount impresses with a compact design and an extreme robust duralumin construction. It is suitable for all firearms with a Picatinny / Weaver rail. Adjustment and fixing of the mount on the rail can be accomplished with the Torx bolt. The mount HS-MOUNT-AR-RISER (AL1/3CW1.63) is ideal for Micro H1 sights as a high riser mount and is compatible with HOLOSUN Micros HS403B/C/GL + HS503CU/GU/FL + HS515BU/CM/GM high repeat accuracy robust & light fast installation with Torx bolt Main Data EAN: 4055132001513 customs tarif number: 85394900000 Technical Parameters Operating Temperature: -30°C - 60 °C Storage Temperature: -40°C - 70 °C Mechanical Parameters Size: 31x45x31 mm Material: aluminium Housing Color: black Weight: 44 g HS-MOUNT-AR-RISER-AL1-3CW1.63 auf Amazon kaufen

HOLOSUN divisible riser and mount for micro reflex sights The Holosun mounts stand out due to easy handling. This divisible high mount is suitable for weapons with straight shanks, where the shoulder rest is on the same height as the system box of the weapon. The mount impresses with a compact design and an extreme robust duralumin construction. It is suitable for all firearms with a Picatinny / Weaver rail. Adjustment and fixing of the mount on the rail is done by a quick release device. It can be mounted on the weapon very easily and with high repeat accuracy with only two quick moves and without any further tools. Thus, replacing the target device is a matter of seconds. The mount HS-MOUNT-AR-RISER-QD is ideal for Micro H1 sights as a high riser mount and is compatible with the following Holosun Micro Red Dots: HS403B/C/GL + HS503CU/GU/FL + HS515BU/CU/CM/GM + HS530G/C high repeat accuracy robust & light fast installation with QD Main Data EAN: 4055132001629 customs tarif number: 90131090000 Technical Parameters Operating Temperature: -30°C - 60 °C Storage Temperature: -40°C - 70 °C Mechanical Parameters Size: 31x45x31 mm Material: aluminium Housing Color: black Weight: 45 g HS-MOUNT-AR-RISER-QD auf Amazon kaufen

HOLOSUN Low Mount für all almost Micro Models The HOLOSUN mounts stand out due to easy handling. The low mount is suitable for weapons with conventional shanks, where the shoulder rest is lower than the system box of the weapon. The mount impresses with a low height and an extreme robust duralumin construction. It is suitable for all firearms with a Picatinny / Weaver rail. Adjustment and fixing of the mount on the rail can be accomplished with the Torx bolt. The mount HS-MOUNT-LOW is ideal for Micro H1 sights and is compatible with the following Holosun Micro Red Dots: HS403B/C/GL + HS503CU/GU/FL + HS515BU/CM/GM high repeat accuracy robust & light low construction height fast installation with Torx bolt Main Data EAN: 4055132001469 customs tarif number: 85394900000 Technical Parameters Operating Temperature: -30°C - 60 °C Storage Temperature: -40°C - 70 °C Mechanical Parameters Size: 31x53x12 mm Material: aluminium Housing Color: black Weight: 28 g HS-MOUNT-LOW auf Amazon kaufen

HOLOSUN high riser mount for HS510C The HOLOSUN mounts stand out due to easy handling. The high riser mount is suitable for weapons with straight shanks, where the shoulder rest is on the same height as the system box of the weapon. The riser impresses with a compact design and an extreme robust duralumin construction. The mount HS-RISER-510C is compatible with the Holosun HS510C. high repeat accuracy robust & light Main Data EAN: 4055132002275 customs tarif number: 90139005000 Technical Parameters Operating Temperature: -30°C - 60 °C Storage Temperature: -40°C - 70 °C Mechanical Parameters Size: 40x80.5x5.5 mm Material: aluminium Housing Color: black Weight: 44 g HS-RISER-510C auf Amazon kaufen

Innomount Blaser Quick Release Mount for your HOLOSUN reflex sight INNOMOUNT mounts are characterized by the highest quality, performance and reliability. The mounts are mostly used in hunting, military and sport shooting. The innovative quick-detachable mounts are suitable for different optics or systems. INNOMOUNT mounts stand for extreme load capacity, low construction heights and an elegant design. Particularly noteworthy is the ease of use, the patented opening function and the repeatability when mounting on the weapon. They can be mounted with two quick movements very easily and repeatable, without the addition of any tools on the weapon. Thus, replacing the target device is a matter of seconds. The INNOMOUNT saddle mount SLIGHT LONG for BLASER guns with the extremely low height of only 6mm can withstand the toughest of loads as it closes on both cut-outs of the Blaser barrel. Advantages: Innoative, repeatable, robust, light, 180 ° rotatable, diverse The mount is compatible with red dot sights of Holosun 503, 515, Docter Sight II, III, Burris Fast Fire and MEOPTA Meosight. Compatible with Blaser R8 / R93 / S2 / D99 / BBF95 / K9 Easy handling in a matter of seconds: Can be mounted and removed due to two retractable quick-release levers that do not open unintentionally even under the toughest conditions Absolutely repeatable with extreme load capacity Main Data EAN: 4260427130230 Technical Parameters Operating Temperature: -20°C - 50 °C Storage Temperature: -50°C - 70 °C Mechanical Parameters Size: 97x28x16 mm Material: aluminium Housing Color: black Weight: 87 g HS-MOUNT-BLASER auf Amazon kaufen

Innomount Merkel Quick Release Mount for your HOLOSUN reflex sight INNOMOUNT mounts are characterized by the highest quality, performance and reliability. The mounts are mostly used in hunting, military and sport shooting. The innovative quick-detachable mounts are suitable for different optics or systems. INNOMOUNT mounts stand for extreme load capacity, low construction heights and an elegant design. Particularly noteworthy is the ease of use, the patented opening function and the repeatability when mounting on the weapon. They can be mounted with two quick movements very easily and repeatable, without the addition of any tools on the weapon. Thus, replacing the target device is a matter of seconds. The INNOMOUNT saddle mount SLIGHT LONG for MERKEL guns with the extremely low height of only 6mm can withstand the toughest of loads as it closes on both cut-outs of the Blaser barrel. Advantages: Innoative, repeatable, robust, light, 180 ° rotatable, diverse The mount is compatible with red dot sights of Holosun 503, 515, Docter Sight II, III, Burris Fast Fire and MEOPTA Meosight. Compatible with various MERKEL guns Easy handling in a matter of seconds: Can be mounted and removed due to two retractable quick-release levers that do not open unintentionally even under the toughest conditions Absolutely repeatable with extreme load capacity Main Data EAN: 4055132011482 Warranty: 2 Jahre Technical Parameters Operating Temperature: -20°C - 50 °C Storage Temperature: -50°C - 70 °C Mechanical Parameters Size: 97x28x16 mm Material: aluminium Housing Color: black Weight: 89 g

Innomount Sauer Quick Release Mount for your HOLOSUN reflex sight INNOMOUNT mounts are characterized by the highest quality, performance and reliability. The mounts are mostly used in hunting, military and sport shooting. The innovative quick-detachable mounts are suitable for different optics or systems. INNOMOUNT mounts stand for extreme load capacity, low construction heights and an elegant design. Particularly noteworthy is the ease of use, the patented opening function and the repeatability when mounting on the weapon. They can be mounted with two quick movements very easily and repeatable, without the addition of any tools on the weapon. Thus, replacing the target device is a matter of seconds. The INNOMOUNT SLIGHT for Sauer 303 / ISI Mount 202 guns with the extremely low height of only 4mm can withstand the toughest of loads. Compatible with red dot sights HOLOSUN 403, 503, 515, AIMPOINT MICRO H1, T1, H2 und T2. The conversion of the reflex sights on the new mounting base is simple and requires no special skills. Easy handling in a matter of seconds: Can be mounted and removed with quick release lever. Absolutely repeatable with extreme load capacity. Main Data EAN: 4260427130216 Technical Parameters Operating Temperature: -20°C - 50 °C Storage Temperature: -50°C - 70 °C Mechanical Parameters Size: 51x28x11 mm Material: aluminium Housing Color: black Weight: 40 g HS-MOUNT-SAUER303 auf Amazon kaufen

Innomount Sauer Quick Release Mount for your HOLOSUN reflex sight INNOMOUNT mounts are characterized by the highest quality, performance and reliability. The mounts are mostly used in hunting, military and sport shooting. The innovative quick-detachable mounts are suitable for different optics or systems. INNOMOUNT mounts stand for extreme load capacity, low construction heights and an elegant design. Particularly noteworthy is the ease of use, the patented opening function and the repeatability when mounting on the weapon. They can be mounted with two quick movements very easily and repeatable, without the addition of any tools on the weapon. Thus, replacing the target device is a matter of seconds. The INNOMOUNT SLIGHT LONG is for Sauer 404 and has aextremely low height of only 6mm can withstand the toughest of loads. Compatible with red dot sights HOLOSUN 403, 503, 515, AIMPOINT MICRO H1, T1, H2 und T2. The conversion of the reflex sights on the new mounting base is simple and requires no special skills. Easy handling in a matter of seconds: Can be mounted and removed with quick release lever. Absolutely repeatable with extreme load capacity. Main Data EAN: 4055132011475 Warranty: 2 Jahre Technical Parameters Operating Temperature: -20°C - 50 °C Storage Temperature: -50°C - 70 °C Mechanical Parameters Material: aluminium Housing Color: black Weight: 85 g

Tactical quick release Flex offset - Ring 30mm from Innomount INNOMOUNT mounts are characterized by the highest quality, performance and reliability. The mounts are mostly used in hunting, military and sport shooting. The innovative quick-detachable mounts are suitable for different optics or systems. INNOMOUNT mounts stand for extreme load capacity, low construction heights and an elegant design. Particularly noteworthy is the ease of use, the patented opening function and the repeatability when mounting on the weapon. They can be mounted with two quick movements very easily and repeatable, without the addition of any tools on the weapon. Thus, replacing the target device is a matter of seconds. The mount is compatible with scopes 30mm Absolutely repeatable with extreme load capacity Easy handling in a matter of seconds: Can be mounted and removed due to two retractable quick-release levers that do not open unintentionally even under the toughest conditions Main Data EAN: 4055132011468 Warranty: 2 Jahre Technical Parameters Operating Temperature: -20°C - 50 °C Storage Temperature: -50°C - 70 °C Mechanical Parameters Material: aluminium Housing Color: black Weight: 160 g

Innomount Tikka Quick Release Mount for your HOLOSUN reflex sight INNOMOUNT mounts are characterized by the highest quality, performance and reliability. The mounts are mostly used in hunting, military and sport shooting. The innovative quick-detachable mounts are suitable for different optics or systems. INNOMOUNT mounts stand for extreme load capacity, low construction heights and an elegant design. Particularly noteworthy is the ease of use, the patented opening function and the repeatability when mounting on the weapon. They can be mounted with two quick movements very easily and repeatable, without the addition of any tools on the weapon. Thus, replacing the target device is a matter of seconds. The INNOMOUNT SLIGHT for Tikka T3 with the extremely low height of only 5mm can withstand the toughest loads. Compatible with red dot sights HOLOSUN 403, 503, 515, AIMPOINT MICRO H1, T1, H2 und T2. The conversion of the reflex sights on the new mounting base is simple and requires no special skills. Absolutely repeatable with extreme load capacity. No unintentional opening of the assembly is possible because quick release sunk in the profile and jumps out only at the touch of a button. Main Data EAN: 4260427130223 Technical Parameters Operating Temperature: -20°C - 50 °C Storage Temperature: -50°C - 70 °C Mechanical Parameters Size: 51x28x11 mm Material: aluminium Housing Color: black Weight: 40 g HS-MOUNT-TIKKAT3 auf Amazon kaufen

Innomount Picantinny / Weaver / Helix Quick Release Mount for your HOLOSUN reflex sight INNOMOUNT mounts are characterized by the highest quality, performance and reliability. The mounts are mostly used in hunting, military and sport shooting. The innovative quick-detachable mounts are suitable for different optics or systems. INNOMOUNT mounts stand for extreme load capacity, low construction heights and an elegant design. Particularly noteworthy is the ease of use, the patented opening function and the repeatability when mounting on the weapon. They can be mounted with two quick movements very easily and repeatable, without the addition of any tools on the weapon. Thus, replacing the target device is a matter of seconds. The INNOMOUNT saddle mount SLIGHT for guns with picatinny/weaver rails with an extremely low height of only 5mm can withstand the toughest of loads. Compatible with red dot sights HOLOSUN 403, 503, 515, AIMPOINT MICRO H1 and T1. The conversion of the reflex sights on the new mounting base is simple and requires no special skills. Easy handling in a matter of seconds: Can be mounted and removed with quick release lever, absolutely repeatable with extreme load capacity The mounting fits on all Picatinny and Weaver rails (Ideal for Merkel Helix, Steyr Scout, Hera Arms Triarii, etc.) No unintentional opening of the assembly is possible because quick release sunk in the profile and jumps out only at the touch of a button Main Data EAN: 4260427130209 Technical Parameters Operating Temperature: -20°C - 50 °C Storage Temperature: -50°C - 70 °C Mechanical Parameters Size: 51x28x11 mm Material: aluminium Housing Color: black Weight: 40 g HS-MOUNT-WEAVER-PICATINNY-HELIX auf Amazon kaufen