Important Notice for Orders in Germany: Please note: Before shipping, we will check your BKA exemption permit for validity. Send it to us via email with your order number after placing your order. Shipping can only occur after successful verification. Important! Licensed Item! Legal Note: Purchase in Germany only possible with a BKA exemption permit. The purchase, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only acquire this licensed item if you possess the appropriate acquisition authorization. It is the user's sole responsibility to inform themselves about the applicable regulations in their country before acquisition or use and to comply with them. Consult your responsible authority! The Holosun IRIS-1-GR is a sleek, single-functional laser aiming device designed for users who demand maximum reliability with minimal weight. The redesigned 7075 Aluminium housing achieves a weight reduction of about 33% compared to the LS117 series and a 20% lower profile - ideal for modern rifles and compact platforms. The visible dot laser with a wavelength of 520 nm nm and an output power of < 5 mW (Visible Laser Class 3R) provides a sharp aiming point. The IRIS module is operated via a centrally placed, ergonomically positioned push button (Top-Fire) with momentary and continuous ON modes, as well as a rear Power/Mode Selector; additionally, a single-button pressure pad (Crane Plug / Gel Button) is included for remote activation at any position. The device runs on AA batteries, indicates low battery with an LED, and is protected against intrusion according to IP 68 - robust enough for tactical deployments. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Reduced, ultra-light 7075 Aluminium casing - approximately 33% lighter and 20% thinner than the LS117 series. Visible red laser 520 nm nm, <5 mW (Visible Laser Class 3R) - clearly visible day and night. Ergonomic: A top-mounted trigger button (Momentary & Constant ON), rear mode selector switch, and tactical gel cable switch (included) allow for comfortable operation for both right- and left-handed users. Robust: IP 68 protection, operating range -40°C - 50 °C, vibration-resistant up to 1000 G Operated with AA battery, 1.5V battery, adjustment range ± 50 MOA MOA Delivery Content Holosun IRIS-1-GR Remote switch (Crane-Plug) AA battery Adjustment tool (e.g., Allen key) Lens cleaning cloth Rubber cap / cover for laser opening Protective case User manual Included warranty brochure Main Data EAN: 4055132040031 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: AA battery, 1.5V Battery count: 1 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-1-GR Remote switch (Crane-Plug) AA battery Adjustment tool (e.g., Allen key) Lens cleaning cloth Rubber cap / cover for laser opening Protective case User manual Included warranty brochure Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Light sources: laser BKA exception: yes Laser illuminator wavelength: 830 nm Footprint: Picatinny Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important notice for orders in Germany: Please note: Before shipping, we will check the validity of your BKA exception permit. Send it to us via email with your order number after placing your order. Shipping can occur only after successful verification. Important! Permission-required item! Legal notice: Purchase in Germany is only possible with a BKA exception permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations in many European countries. You can only purchase this permission-required item if you hold the appropriate acquisition permit. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before acquisition or use. Consult your competent authority! The Holosun IRIS-1-IR is a sleek, single-function laser targeting device, developed for users who demand maximum reliability with minimal weight. The revised 7075 Aluminium housing achieves a weight reduction of around 33% compared to the LS117 series and a 20% lower profile - ideal for modern rifles and compact platforms. The visible dot laser with a 830 nm nm wavelength and an output power of < 5 mW (Visible Laser Class 3R) provides a sharp aiming point. The IRIS module is operated via a central, ergonomically placed push button (Top-Fire) with momentary and constant ON, as well as a rear Power/Mode Selector; additionally, a single-button pressure pad (Crane-Plug / Gel-Button) is included, allowing remote activation at any location. The device runs on AA batteries, indicates low battery level via LED, and is protected against intrusion according to IP 68 - robust enough for tactical operations. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Reduced, ultra-light 7075 Aluminium housing - approximately 33% lighter and 20% thinner than the LS117 series. Visible red laser 830 nm nm, <5 mW (Visible Laser Class 3R) - clearly visible day and night. Ergonomic: A top-mounted activation button (Momentary & Constant ON), rear mode selector switch, and tactical gel cable switch (included) allow for comfortable operation by both right- and left-handed users. Robust: IP 68 protection, operating range -40°C - 50 °C, vibration resistant up to 1000 G Operated with AA battery, 1.5V battery, adjustment range ± 50 MOA MOA Delivery Content Holosun IRIS-1-IR Remote Switch (Crane-Plug) AA Battery Adjustment Tool (e.g. Allen Key) Lens Cleaning Cloth Rubber Cap / Cover for Laser Aperture Protective Case User Manual Warranty Brochure Insert Main Data EAN: 4055132040017 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: AA battery, 1.5V Battery count: 1 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-1-IR Remote Switch (Crane-Plug) AA Battery Adjustment Tool (e.g. Allen Key) Lens Cleaning Cloth Rubber Cap / Cover for Laser Aperture Protective Case User Manual Warranty Brochure Insert Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Light sources: laser BKA exception: yes Laser illuminator wavelength: 830 nm Footprint: Picatinny Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA exemption permit. Send it to us after your order by email, including your order number. Shipping can only occur after a successful check. Important! Item requiring authorization! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The purchase, possession, assembly, and use of this device are subject to legal regulations in many European countries. You can only purchase this item requiring authorization if you have the appropriate purchase permit. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchase or use. Consult your relevant authority! The Holosun IRIS-1-RD is a sleek, single-function laser aiming device developed for users who demand maximum reliability with minimal weight. The redesigned 7075 Aluminium housing achieves a weight reduction of approximately 33% and a 20% lower profile compared to the LS117 series - ideal for modern rifles and compact platforms. The visible dot laser with a wavelength of 635 nm nm and an output power of < 5 mW (Visible Laser Class 3R) provides a sharp aiming point. The IRIS module is operated via a centrally located, ergonomically placed push button (Top-Fire) with Momentary and Constant-ON modes, as well as a rear Power/Mode Selector; additionally, a single-button pressure pad (Crane-Plug / Gel Button) is included, allowing for remote activation at any location. The device runs on AA batteries, indicates low battery status via LED, and is protected against intrusion according to IP 68 - robust enough for tactical operations. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Reduced, ultra-lightweight 7075 Aluminium housing - approximately 33% lighter and 20% thinner than the LS117 series. Visible red laser 635 nm nm, <5 mW (Visible Laser Class 3R) - clearly visible day and night. Ergonomic: A top-mounted release button (Momentary & Constant ON), rear mode selector switch, and tactical gel cable switch (included) allow both right- and left-handed users to operate comfortably. Robust: IP 68 protection, operating range -40°C - 50 °C, vibration resistant up to 1000 G Operated with a AA battery, 1.5V battery, adjustment range ± 50 MOA MOA Delivery Content Holosun IRIS-1-RD Remote Switch (Crane-Plug) AA Battery Adjustment Tool (e.g., Allen key) Lens Cleaning Cloth Rubber Cap / Cover Cap for Laser Opening Protective Case User Manual Warranty Brochure Insert Main Data EAN: 4055132040093 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: AA battery, 1.5V Battery count: 1 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-1-RD Remote Switch (Crane-Plug) AA Battery Adjustment Tool (e.g., Allen key) Lens Cleaning Cloth Rubber Cap / Cover Cap for Laser Opening Protective Case User Manual Warranty Brochure Insert Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Light sources: laser BKA exception: yes Laser illuminator wavelength: 830 nm Footprint: Picatinny Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA exemption permit. Send it to us by email after your order, including your order number. Shipping can only occur after successful verification. Important! Permit-required Item! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The purchase, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only purchase this permit-required item if you possess the appropriate acquisition authorization. It is the sole responsibility of the user to inform themselves of the applicable regulations in their country and comply with them before purchase or use. Consult your relevant authority! The Holosun IRIS-2-GR-IR is a dual aiming laser (visible + IR) in an ultra-compact 7075 Aluminium housing - deliberately flatter and lighter than its predecessor, with a centrally located trigger button for ambidextrous operation. This multi-laser device features parallel-aligned visible green and infrared (IR) lasers. This allows for quick and precise zeroing of both lasers with the visible laser in daylight. It is ideal for users who want a bright green dot during the day and wish to switch to IR with night vision devices at night. The rear on/off switch and a mode selector switch improve ergonomics and user-friendliness. The IRIS module offers four operating modes, each with two brightness levels. The user can choose between a green laser and an IR laser, both available in two power levels. The power supply is provided by a CR123A battery, whose decreasing capacity is indicated by a red LED. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Dual-Laser: visible green laser (520 nm) plus IR laser (830 nm) - for visual and night vision applications Robust: IP 68 protection, operating range -40°C - 50 °C, vibration resistant up to 1000 G Operated with a CR123A Industrial Lithium Battery, 3V 1400mAh battery, adjustable range of ± 50 MOA MOA Ergonomic: A top-mounted trigger button (Momentary & Continuous ON), a rear mode selector switch, and a tactical gel cable switch (included) allow for comfortable operation for both right- and left-handed users. Reduced, ultra-light 7075 Aluminium housing - significantly reduced in weight/profile compared to the previous model LS221. Delivery Content Holosun IRIS-2-GR-IR Remote Switch (Crane-Plug) AA Battery Adjustment Tool (e.g. Allen wrench) Lens Cleaning Cloth Rubber Cap / Cover Cap for Laser Opening Protective Case User Manual Warranty Leaflet Main Data EAN: 4055132037758 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-2-GR-IR Remote Switch (Crane-Plug) AA Battery Adjustment Tool (e.g. Allen wrench) Lens Cleaning Cloth Rubber Cap / Cover Cap for Laser Opening Protective Case User Manual Warranty Leaflet Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Flip cap type: yes Light sources: LED + Laser BKA exception: yes LED illuminator: yes Laser illuminator wavelength: 830 nm Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will verify the validity of your BKA exemption permit. Send it to us via email, including your order number, after placing your order. Shipping can only occur after successful verification. Important! Item requiring a permit! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only acquire this item requiring a permit if you hold the appropriate acquisition authorization. It is the user's sole responsibility to inform themselves about applicable regulations in their country before acquiring or using it and to comply with them. Consult your relevant authority! The Holosun IRIS-2-RD-IR is a dual targeting laser (visible + IR) in an ultra-compact 7075 Aluminium housing - deliberately flatter and lighter than its predecessor, with a centrally placed activation button for ambidextrous operation. This multi-laser device features parallel-aligned visible green and infrared (IR) lasers. This allows for a quick and precise zeroing of both lasers with the visible laser in daylight. Ideal for users who want a bright green point during the day and wish to resort to IR with night vision devices at night. The rear on/off switch and a mode selector switch improve ergonomics and user-friendliness. The IRIS module offers four operating modes, each with two brightness levels. The user can choose between a green laser and an IR laser, both available in two power settings. Power is supplied by a CR123A battery, whose decreasing capacity is indicated by a red LED. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Dual-Laser: visible green laser (520 nm) plus IR laser (830 nm) - for visual and night vision applications Robust: IP 68 protection, operating range -40°C - 50 °C, vibration-resistant up to 1000 G Operated with CR123A Industrial Lithium Battery, 3V 1400mAh battery, adjustment range ± 50 MOA MOA Ergonomic: A top-mounted release button (Momentary & Permanent ON), a rear mode selector switch, and a tactical gel cable switch (included) allow for comfortable operation for both right and left-handed users. Reduced, ultra-light 7075 Aluminium housing - significantly reduced in weight/profile compared to the previous model LS221. Delivery Content Holosun IRIS-2-RD-IR Remote Switch (Crane-Plug) AA battery Adjustment tool (e.g. Allen key) Lens cleaning cloth Rubber cap / cover cap for laser opening Protective case User manual Warranty brochure insert Main Data EAN: 4055132040024 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-2-RD-IR Remote Switch (Crane-Plug) AA battery Adjustment tool (e.g. Allen key) Lens cleaning cloth Rubber cap / cover cap for laser opening Protective case User manual Warranty brochure insert Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Flip cap type: yes Light sources: LED + Laser BKA exception: yes LED illuminator: yes Laser illuminator wavelength: 830 nm Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Wichtiger Hinweis für Bestellungen in Deutschland: Bitte beachten Sie: Vor dem Versand prüfen wir Ihre BKA-Ausnahmegenehmigung auf Gültigkeit. Senden Sie uns diese nach Ihrer Bestellung per E-Mail unter Angabe Ihrer Bestellnummer zu. Erst nach erfolgreicher Prüfung kann der Versand erfolgen . Wichtig! Erlaubnispflichtiger Artikel! Rechtlicher Hinweis: Erwerb in Deutschland nur mit BKA-Ausnahmegenehmigung möglich. Der Erwerb, der Besitz, die Montage und die Nutzung dieses Gerätes unterliegt in vielen Ländern Europas gesetzlichen Vorschriften und Regelungen. Sie können diesen erlaubnispflichtigen Artikel nur erwerben, wenn Sie im Besitz einer entsprechenden Erwerbsberechtigung sind. Es liegt in der alleinigen Verantwortung des Nutzers, sich vor dem Erwerb oder der Verwendung über die geltenden Vorschriften in seinem Land zu informieren und diese einzuhalten. Fragen Sie Ihre zuständige Behörde! Der Holosun IRIS-3-GR-IR ist ein Ziellaser (sichtbar + IR + IR Laseraufheller) im ultrakompakten 7075 Aluminiumgehäuse - bewusst flacher und leichter als sein Vorgänger, mit mittig platziertem Auslöseknopf für beidhändige Bedienung. Dieses fortschrittliche System integriert ko-ausgerichtete sichtbare rote und infrarote (IR) Ziellaser und ermöglicht so präzises Einschießen bei Tageslicht mit dem sichtbaren Laser und einen nahtlosen Übergang zur IR-Funktionalität für Nachteinsätze. Ein leistungsstarker 60-mW-VCSEL-IR-Strahler liefert in Verbindung mit Nachtsichtgeräten hervorragende Leistung bei schlechten Lichtverhältnissen und Dunkelheit. Ein oben angebrachter Strahleinstellregler ermöglicht eine schnelle, handschuhfreundliche Einstellung des IR-Strahls von breit auf schmal für optimale Leistung über unterschiedliche Einsatzdistanzen. professionelles Lasergerät mit Dreifachfunktion, das maximale Leistungsfähigkeit bei ultrakompakter Bauform bietet. sichtbarer grüner Laser (520 nm), IR-Laser (830 nm) sowie 60mW IR-VCSEL-Laseraufheller- für Sicht- und Nachtsicht-Anwendungen Robust: IP 68-Schutz, Arbeitsbereich -40°C - 50 °C, vibrationsfest bis 1000 G Betrieb mit CR123A Industrial Lithium Batterie, 3V 1400mAh-Batterie, Verstellbereich ± 50 MOA MOA Ergonomisch:Ein oben angebrachter dualer Auslöseknopf (Momentan & Dauerhaft AN ), rückseitiger Modus-Wahlschalter und taktischer Gel-Kabel-Schalter (im Lieferumfang) ermöglicht sowohl Rechts- als auch Linkshändern eine bequeme Bedienung. Stammdaten EAN: 4055132037741 Garantie: 3 Jahre Warentarifnummer: 90132000000 Technische Daten Betriebstemperatur: -40°C - 50 °C Lagertemperatur: -40°C - 70 °C Optische Parameter Optische Leistung: 5 mW Laserklasse: 3R Elektrische Parameter Betriebsspannung: 3 V DC Batterie: CR123A Industrial Lithium Batterie, 3V 1400mAh Anzahl Batterien: 1 Mechanische Parameter Abmaße: 81x50x34 mm Material: 7075 Aluminium Gehäusefarbe: schwarz Gewicht: 180 g IP Schutzklasse: IP 68 Holosun Style: Aiming Montagetyp: QD Batteriefach: Seitlich Langwaffen-Optik: ja Oberflächenveredelung: MAO W&E Skala: ± 50 MOA Vibrationsfestigkeit: 1000 G Flipkappentyp: ja Lichtquellen: Laser BKA Genehmigungspflicht: ja Laser Aufheller Wellenlänge: 830 nm Informationen zur Produktsicherheit Hersteller Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Verantwortlicher Wirtschaftsakteur Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA exemption permit. Send it to us via email after your order, including your order number. Shipping can only proceed after successful verification. Important! Item requiring a permit! Legal Notice: Acquisition in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations in many European countries. You can only acquire this item requiring a permit if you have the corresponding acquisition authorization. It is solely the user's responsibility to inform themselves about and comply with the applicable regulations in their country before acquiring or using the device. Consult your relevant authority! The Holosun IRIS-3-RD-IR is a targeting laser (visible + IR + IR illuminator) in an ultra-compact 7075 Aluminium housing - intentionally flatter and lighter than its predecessor, with a centrally placed activation button for ambidextrous operation. This advanced system integrates co-aligned visible red and infrared (IR) targeting lasers, allowing for precise sighting in daylight with the visible laser and seamless transition to IR functionality for night operations. A powerful 60-mW VCSEL IR illuminator provides excellent performance in low light and darkness when used with night vision devices. A beam adjustment dial located on top enables quick, glove-friendly adjustment of the IR beam from wide to narrow for optimal performance across different engagement distances. Ideal for users who want a bright green dot during the day and wish to rely on IR with night vision devices at night. The rear on/off switch and a mode selector switch enhance ergonomics and user-friendliness. The IRIS module offers four operating modes, each with two brightness levels. The user can choose between a green laser and an IR laser, both available in two power levels. Power is supplied by a CR123A battery, with diminishing capacity indicated by a red LED. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Professional laser device with triple function, offering maximum performance in an ultra-compact design. Visible red laser (635 nm), IR laser (830 nm), and 60mW IR-VCSEL laser illuminator for visible and night vision applications. Robust: IP 68 protection, operating range -40°C - 50 °C, vibration resistant up to 1000 G. Powered by CR123A Industrial Lithium Battery, 3V 1400mAh battery, Adjustment range ± 50 MOA MOA Ergonomic: A top-mounted dual trigger button (momentary and constant ON), rear mode selector switch, and tactical gel cable switch (included) allow for comfortable operation for both right-handed and left-handed users. Delivery Content Holosun IRIS-3-RD-IR Dual Remote Switch (Crane-Plug) AA battery Tool for adjustment (e.g. Allen wrench) Lens cleaning cloth Rubber cap / cover for laser opening Protective case User manual Insert with warranty brochure Main Data EAN: 4055132039455 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 0.7 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-3-RD-IR Dual Remote Switch (Crane-Plug) AA battery Tool for adjustment (e.g. Allen wrench) Lens cleaning cloth Rubber cap / cover for laser opening Protective case User manual Insert with warranty brochure Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Flip cap type: yes Light sources: laser BKA exception: yes Laser illuminator wavelength: 830 nm Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA special permit. Send it to us by email after your order, including your order number. The shipment can only proceed after successful verification. Important! Item requiring a permit! Legal Notice: Acquisition in Germany is only possible with a BKA special permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only purchase this item requiring a permit if you have the appropriate acquisition authorization. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before acquisition or use. Ask your local authority! The Holosun IRIS-4-GR-IR is a target laser (visible + IR + IR laser illuminator) in an ultra-compact 7075 Aluminium housing - deliberately flatter and lighter than its predecessor, with a centrally placed trigger button for ambidextrous operation. This advanced system integrates co-aligned visible green and infrared (IR) target lasers, allowing for precise zeroing in daylight with the visible laser and a seamless transition to IR functionality for nighttime operations. A powerful 60-mW VCSEL IR illuminator delivers excellent performance in low-light conditions and darkness in conjunction with night vision devices. A top-mounted beam adjustment knob allows for quick, glove-friendly adjustment of the IR beam from wide to narrow for optimal performance across different engagement distances. Ideal for users who want a bright green dot during the day and switch to IR with night vision devices at night. Two independent fire buttons allow for tactile, ambidextrous control of the laser and light functions, while the updated rear-positioned on/off and mode selector provides optimized control. The IRIS module offers four operating modes, each with two brightness levels. The user can choose between a green laser, an IR laser, a VCSEL laser illuminator, and a white light LED lamp, available in two power levels. The included three-button remote switch connects via a crane plug and offers a visible laser override function for quick activation. For versatile power supply options, the IRIS-RD4 supports both the included rechargeable 18650 battery via USB-C and two CR123A batteries, ensuring reliable power supply in any operating environment. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Professional laser device with quadruple function, offering maximum performance in an ultra-compact design. Visible red laser (520 nm), IR laser (830 nm), 60 mW IR-VCSEL laser illuminator as well as white light LED lamp with 1000 lumens and 25000 candela - for visible and night vision applications. Robust: IP 68 protection, operating range -40°C - 50 °C, vibration resistant up to 1000 G Operated with CR123A Industrial Lithium Battery, 3V 1400mAh, adjustment range ± 50 MOA MOA Ergonomic: Two independent fire buttons enable tactile, two-handed control of the laser and light functions, while the updated rear-positioned on/off and mode selector offers optimized control. A rear mode selector switch and tactical gel cable switch (included) allow for comfortable operation by both right and left-handed users. Delivery Content Holosun IRIS-4-GR-IR Triple Remote Switch (Crane-Plug) CR123A Industrial Lithium Battery, 3V 1400mAh Adjustment Tool (e.g. Allen Key) Lens Cleaning Cloth Rubber Cap / Cover Cap for Laser Opening Protective Case Instruction Manual Included Warranty Brochure Main Data EAN: 4055132039981 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 0.7 mW Laser Class: 3R Electrical Parameters Operating Voltage: 6 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 2 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-4-GR-IR Triple Remote Switch (Crane-Plug) CR123A Industrial Lithium Battery, 3V 1400mAh Adjustment Tool (e.g. Allen Key) Lens Cleaning Cloth Rubber Cap / Cover Cap for Laser Opening Protective Case Instruction Manual Included Warranty Brochure Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Flip cap type: yes Light sources: LED + Laser BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 1,000 lum Laser illuminator wavelength: 830 nm Footprint: Picatinny Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important notice for orders in Germany: Please note: Before shipping, we will check the validity of your BKA exemption permit. Send it to us via email, including your order number, after placing your order. Shipping can only occur after a successful verification. Important! Item subject to authorization! Legal notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only purchase this item subject to authorization if you possess the corresponding permit. It is the sole responsibility of the user to be informed about the applicable regulations in their country before purchase or use and to comply with them. Consult your competent authority! The Holosun IRIS-4-RD-IR is a targeting laser (visible + IR + IR illuminator) in an ultra-compact 7075 Aluminium housing - deliberately flatter and lighter than its predecessor, with a centrally located activation button for ambidextrous operation. This advanced system integrates co-aligned visible red and infrared (IR) targeting lasers, allowing for precise daylight zeroing with the visible laser and seamless transition to IR functionality for night operations. A powerful 60 mW VCSEL IR illuminator delivers outstanding performance in low light conditions and darkness when used with night vision devices. A top-mounted beam adjustment dial allows for quick, glove-friendly adjustment of the IR beam from wide to narrow for optimal performance over different engagement distances. Ideal for users who want a bright green dot during the day and wish to resort to IR with night vision devices at night. Two independent fire buttons provide tactile, ambidextrous control of laser and light functions, while the updated, rear-positioned on/off and mode selector offers optimized control. The IRIS module offers four operating modes, each with two brightness levels. The user can choose between a red laser, an IR laser, a VCSEL illuminator, and a white light LED lamp, all available in two power levels. The included three-button remote switch connects via a Crane plug, offering a visible laser override function for quick activation. For versatile power supply options, the IRIS-RD4 supports both the included rechargeable 18650 battery via USB-C and two CR123A batteries, ensuring reliable power supply in any operating environment. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Professional laser device with quadruple function that offers maximum performance in an ultra-compact design. Visible red laser (635 nm), IR laser (830 nm), 60mW IR-VCSEL laser illuminator, and white light LED lamp with 1000 lumens and 25000 candela for visible and night vision applications Robust: IP 68 protection, operating range -40°C - 50 °C, vibration-resistant up to 1000 G Operates with CR123A Industrial Lithium Battery, 3V 1400mAh, adjustment range ± 50 MOA MOA Ergonomic: Two independent fire buttons enable tactile, ambidextrous control of the laser and light functions, while the updated, rear-positioned on/off and mode selector offers optimized control. A rear mode selector switch and tactical gel cable switch (included) allow comfortable operation for both right- and left-handed users. Delivery Content Holosun IRIS-4-RD-IR Triple Remote Switch (Crane-Plug) CR123A Industrial Lithium Battery, 3V 1400mAh Adjustment tool (e.g. Allen key) Lens cleaning cloth Rubber cap / cover cap for laser opening Protective case Instruction manual Warranty brochure insert Main Data EAN: 4055132039837 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Laser Class: 3R Electrical Parameters Operating Voltage: 6 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 2 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 180 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun IRIS-4-RD-IR Triple Remote Switch (Crane-Plug) CR123A Industrial Lithium Battery, 3V 1400mAh Adjustment tool (e.g. Allen key) Lens cleaning cloth Rubber cap / cover cap for laser opening Protective case Instruction manual Warranty brochure insert Holosun Style: Aiming Mounting type: QD Battery compartement: Seitlich rifle sight: yes Surface finish: MAO W&E Range: ± 50 MOA Vibration strength: 1000 G Flip cap type: yes Light sources: LED + Laser BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 1,000 lum Laser illuminator wavelength: 830 nm Footprint: Picatinny Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check your BKA exemption permit for validity. Send it to us via email with your order number after placing your order. Shipping can only occur after a successful review. Important! Licensed Article! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations in many European countries. You can only purchase this licensed article if you possess the appropriate purchase authorization. It is solely the user's responsibility to be informed about and comply with the applicable regulations in their country before purchasing or using the product. Consult your relevant authority! The LE117G is a laser/light module with a visible green laser, developed for long gun applications. The LE117G features a Grade 5 titanium housing and a quick-release Picatinny rail mount. The LE117G is powered by a CR123 lithium battery, which can provide an operating time of up to 5,000 hours. The switch located at the rear allows the user to select between permanently ON, OFF, or activation via the included remote pressure switch. The LE117G also has tactile windage and elevation adjustments for precise zeroing, as well as a top-mounted activation button. Powerful red laser: Targeting device for quick and precise target acquisition at medium and long distances. Extremely robust: High-quality Grade 5 titanium case with quick-release Picatinny mount for maximum stability. Long operating time: Up to 5000 hours of battery life with just one CR123 battery. Precise adjustment: windage and elevation adjustment for exact zeroing and perfect point of impact. Easy Operation: Rear switch for continuous operation, off, or remote control with push button. Delivery Content Holosun LE117G CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen key) Lens cleaning cloth User manual Warranty brochure insert Main Data EAN: 4055132016661 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Beam Shape: Dot Optical Power: 5 mW Laser Class: 3R Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Operating Current: 5 - 30, typ 15 mA Battery: CR123A Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 85x46x36 mm Material: Titanium Housing Color: black Weight: 132 g Protection Class: IP 67 Shop+Web Delivery Content: Holosun LE117G CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen key) Lens cleaning cloth User manual Warranty brochure insert Holosun rifle sight: yes BKA exception: yes Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA special permit. Send it to us via email after your order, including your order number. Shipping can only proceed after successful verification. Important! Permitted Item! Legal Notice: Acquisition in Germany only possible with a BKA special permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations in many European countries. You can only purchase this permitted item if you possess the appropriate acquisition authorization. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchase or use. Consult your relevant authority! The LE117IR is an IR (infrared) laser light module, designed for use with night vision devices on rifles. The LE117IR features a housing made of Grade 5 titanium and a quick-release Picatinny rail mount. The LE117IR is powered by a single CR123 battery, which can provide an operating duration of up to 5,000 hours. The rear-mounted selector switch allows the user to choose between continuously ON, OFF, or activation via the supplied remote pressure switch. The LE117IR also features tactile side and height adjustments for precise zeroing, as well as a top-mounted activation button. Powerful red laser: Targeting device for fast and precise target acquisition at medium and long distances. Extremely robust: High-quality Grade-5 titanium housing with quick-release Picatinny mount for maximum stability. Long service life: Up to 5000 hours of battery life with only one CR123 battery. Precise adjustment: windage and elevation adjustment for accurate sighting-in and perfect point of impact. Simple operation: Rear switch for continuous operation, Off, or remote control with pressure switch. Delivery Content Holosun LE117IR CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., Allen key) Lens cleaning cloth User manual Warranty brochure insert Main Data EAN: 4055132020354 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Beam Shape: Dot Optical Power: 0.7 mW Laser Class: 1 Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 85x46x36 mm Material: Titanium Housing Color: black Weight: 132 g Protection Class: IP 67 Shop+Web Delivery Content: Holosun LE117IR CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., Allen key) Lens cleaning cloth User manual Warranty brochure insert Holosun rifle sight: yes BKA exception: yes Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA exemption permit. Send it to us via email after your order, including your order number. Shipping can only occur after successful verification. Important! Item requiring a permit! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only purchase this item requiring a permit if you possess the appropriate authorization. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before acquisition or use. Consult your relevant authority! The LE117R is a laser/light module with a visible red laser, developed for long gun applications. The LE117R features a housing made of Grade 5 titanium and a quick-release Picatinny rail mount. The LE117R is powered by a CR123 lithium battery, which can provide an operating time of up to 5,000 hours. The rear-mounted selector switch allows the user to choose between permanently ON, OFF, or activation via the included remote pressure switch. The LE117R also features tactile windage and elevation adjustments for precise zeroing, as well as a top-mounted activation button. Powerful red laser: Targeting device for fast and precise aiming at medium and long distances. Extremely robust: High-quality Grade 5 titanium case with quick-release Picatinny mount for maximum stability. Long service life: Up to 5000 hours of battery life with just one CR123 battery. Precise Adjustment: Windage and elevation adjustments for exact zeroing and perfect point of impact. Easy operation: Rear selector switch for continuous operation, off, or remote control with push button. Delivery Content Holosun LE117R CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen key) Lens cleaning cloth User manual Warranty brochure insert Main Data EAN: 4055132021092 Warranty: 1 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Beam Shape: Dot Optical Power: 5 mW Laser Class: 3R Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 85x46x36 mm Material: Titanium Housing Color: black Weight: 132 g Protection Class: IP 67 Shop+Web Delivery Content: Holosun LE117R CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen key) Lens cleaning cloth User manual Warranty brochure insert Holosun rifle sight: yes BKA exception: yes Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA special permit. Send it to us via email with your order number after placing your order. Shipping can only occur after a successful review. Important! Item requiring a permit! Legal Notice: Purchase in Germany only possible with a BKA special permit. The purchase, possession, installation, and use of this device are subject to legal regulations and rules in many European countries. You can only purchase this item requiring a permit if you are in possession of the appropriate acquisition authorization. It is the user's sole responsibility to inform themselves about the applicable regulations in their country before acquisition or use and to comply with them. Consult your responsible authority! The LE221G is a laser/light module with a Class IIIa green laser and a coaxially mounted Class 2 infrared laser for use with night vision devices. The LE221G features a Grade 5 titanium housing and a quick-release Picatinny rail mount. The device is powered by a single CR123 battery, providing up to 5,000 hours of operation. The rear-mounted selector switch allows the user to choose between Visible Low, Visible High, IR Low, and IR High. Activation is accomplished through the included remote pressure switch or can be turned off via the switch. The LE221G also features tactile windage and elevation adjustments for precise zeroing, as well as a top-mounted activation button. Dual Function: Visible Green Laser & IR Class 2 Laser for Night Vision Devices in One Device. Robust design: High-quality Grade 5 titanium housing with quick-release Picatinny mount for secure hold. Long runtime: Up to 5000 hours of battery life with just one CR123 battery. Maximum Precision: Precise windage and elevation adjustment for accurate zeroing. Easy operation: Rear switch with 4 modes (Low/High visible & IR) as well as remote control and top button for quick activation. Delivery Content Holosun LE221G CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., hex key) Lens cleaning cloth User manual Enclosed warranty brochure Main Data EAN: 4055132020613 Warranty: 3 years Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Beam Shape: Dot Optical Power: 0.7 mW Laser Class: 3R Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 86x49x39 mm Material: Titanium Housing Color: black Weight: 198 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun LE221G CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., hex key) Lens cleaning cloth User manual Enclosed warranty brochure Holosun rifle sight: yes BKA exception: yes Reticle color: grün Accessesories certified Laser Safety Eyewear PICO-LPG-780-1064 according to DIN EN 207, suitable for infrared wavelengths >765 - 1100 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please be aware: Before shipping, we check the validity of your BKA exemption permit. Send it to us via email after your order, including your order number. Shipping can only occur after a successful verification. Important! Article requiring permission! Legal Notice: Acquisition in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations in many European countries. You can only purchase this article, which requires permission, if you have the appropriate acquisition authorization. It is the sole responsibility of the user to inform themselves about the applicable regulations in their country before acquisition or use and to comply with them. Consult your responsible authority! The LE221R is a laser/light module with a Class IIIa red laser and a coaxially mounted Class 2 infrared laser for use with night vision devices. The LE221R features a Grade 5 titanium housing and a quick-release Picatinny rail mount. The device is powered by a single CR123 battery, allowing for an operating time of up to 5,000 hours. The rear-mounted selector switch allows the user to choose between Visible Low, Visible High, IR Low, and IR High. Activation is done via the included remote pressure switch or can be turned off via the switch. The LE221R also features tactile side and elevation adjustments for precise zeroing and a top-mounted activation button. Dual-Laser System: Visible red laser and IR laser (Class 2) for precise targeting during the day and in combination with night vision technology. Robust construction: High-quality Grade-5 titanium housing with quick-release Picatinny mount for maximum stability and low weight. Long runtime: Up to 5,000 hours of operation with only one CR123 battery. Flexible control: Rear selector switch for multiple operating modes (Visible Low/High, IR Low/High) and included remote pressure switch. Precise adjustment: Tactile elevation and windage adjustment as well as a top activation button for quick and accurate zeroing. Delivery Content Holosun LE221R CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., Allen wrench) Lens cleaning cloth User manual Warranty leaflet Main Data EAN: 4055132021085 Warranty: 3 years Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Beam Shape: Dot Optical Power: 0.7 mW Laser Class: 3R Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 86x49x39 mm Material: Titanium Housing Color: black Weight: 198 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun LE221R CR123A Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., Allen wrench) Lens cleaning cloth User manual Warranty leaflet Holosun Mounting type: QD rifle sight: yes BKA exception: yes Accessesories certified Laser Safety Eyewear PICO-LPG-780-1064 according to DIN EN 207, suitable for infrared wavelengths >765 - 1100 nm, comfortable fit over prescription glasses or alone, side-shields for wide field of view, for laserwelding, lasercutting, lasermarking, laserengraving, cosmetic applications Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will verify the validity of your BKA exemption permit. Please send it to us via email after your order, including your order number. Shipping can only occur after a successful verification. Important! Authorized Article! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and requirements in many European countries. You can only purchase this authorized article if you possess the corresponding purchase authorization. It is the sole responsibility of the user to inform themselves about the applicable regulations in their country before acquiring or using it and to comply with them. Consult your competent authority! The LE321G is a laser/light module with a visible green Class IIIa laser, a coaxially mounted Class 2 infrared laser, and an IR illuminator for use with night vision devices. The device features a titanium Grade 5 housing and a quick-release Picatinny rail mount. The LE321G is powered by a single CR123 battery, which provides a runtime of up to 5,000 hours. The rear-mounted selector switch allows the user to choose between: Visible Low, Visible High, IR High, IR Illuminator, or IR High with IR Illuminator - each activated via the supplied remote pressure switch - or to turn off the device. The LE321G also features a top-mounted activation button and tactile windage and elevation adjustments for precise zeroing. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch Versatile aiming system: Visible laser (green or red, Class IIIa), IR laser (Class 2), and IR illuminator for maximum precision day and night. Integrated white light: Powerful light source for quick target identification and maximum visibility in dark environments. Extremely robust & lightweight: High-quality titanium housing (Grade 5) with quick-release Picatinny mount for reliable hold and low weight. Long runtime: Up to 5,000 hours of battery operation with a single CR123 battery. Tactical control: Rear selector switch with multiple operating modes, precise height and side adjustment, and remote pressure switch included. Delivery Content Holosun LE321G CR123A Industrial Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., hex key) Lens cleaning cloth User manual Included warranty brochure Main Data EAN: 4055132020316 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 0.7 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 91x74x41 mm Material: 7075 Aluminium Housing Color: black Weight: 300 g Protection Class: IP 67 Shop+Web Delivery Content: Holosun LE321G CR123A Industrial Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g., hex key) Lens cleaning cloth User manual Included warranty brochure Holosun Style: Aiming Mounting type: QD High riser mount: no Battery compartement: Seitlich Solar cell: no Automatic brightness adjustment: no rifle sight: yes Shake Awake - Function: no Memory function: no Surface finish: MAO W&E Range: ± 60 MOA Vibration strength: 1000 G Flip cap type: yes Killflash: no Light sources: LED + Laser BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 800 lum Laser illuminator wavelength: 830 nm Accessesories Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important notice for orders in Germany: Please note: Before shipping, we will verify the validity of your BKA special permit. Send it to us via email after placing your order, including your order number. Shipping can only proceed after successful verification. Important! Item requires a permit! Legal notice: Purchase in Germany is only possible with a BKA special permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only purchase this item requiring a permit if you have the corresponding acquisition permission. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchasing or using it. Consult your competent authority! The LE321R is a laser/light module with a visible red laser of Class IIIa, a coaxially mounted infrared laser of Class 2, and an IR illuminator for use with night vision devices. The device features a housing made of Grade 5 titanium and a quick-release Picatinny rail mount. The LE321R is powered by a single CR123 battery, providing a runtime of up to 5,000 hours. The rear-mounted selector switch allows the user to choose between: Visible Low, Visible High, IR High, IR Illuminator, or IR High with IR Illuminator - each activated via the included remote pressure switch - or to turn the device off. The LE321R also features a top-mounted activation button, as well as tactile side and elevation adjustments (windage & elevation) for precise zeroing. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch High-precision targeting system: Visible red laser (Class IIIa), IR laser (Class 2), and IR illuminator for maximum accuracy day and night. Integrated white light: Powerful lamp for quick target acquisition and optimal visibility in low light conditions. Ultra-robust housing: Made from high-quality grade-5 titanium with quick-release Picatinny mount for secure fit and low weight. Long operating time: Up to 5,000 hours of runtime with just one CR123 battery. Tactical operation: Rear selector switch with multiple operating modes, precise elevation and windage adjustment, as well as a remote pressure switch included. Delivery Content Holosun LE321R CR123A Industrial Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen key) Lens cleaning cloth Instruction manual Warranty brochure insert Main Data EAN: 4055132021078 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 0.7 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 91x74x41 mm Material: 7075 Aluminium Housing Color: black Weight: 300 g Protection Class: IP 67 Shop+Web Delivery Content: Holosun LE321R CR123A Industrial Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen key) Lens cleaning cloth Instruction manual Warranty brochure insert Holosun Style: Aiming Mounting type: QD High riser mount: no Battery compartement: Seitlich Solar cell: no Automatic brightness adjustment: no rifle sight: yes Shake Awake - Function: no Memory function: no Surface finish: MAO W&E Range: ± 60 MOA Vibration strength: 1000 G Flip cap type: yes Killflash: no Light sources: LED + Laser BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 800 lum Laser illuminator wavelength: 830 nm Accessesories Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA exemption permit. Send it to us via email along with your order number after placing your order. Shipping can only occur after successful verification. Important! Regulated Item! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The purchase, possession, assembly, and use of this device is subject to legal regulations and requirements in many European countries. You can only purchase this regulated item if you have the appropriate acquisition permit. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchasing or using the item. Consult your competent authority! The LE321R-FDE is a laser/light module with a visible red laser, a coaxially mounted Class 2 infrared laser, and an IR illuminator for use with night vision devices. The device features a housing made of Grade 5 titanium and a quick-release Picatinny rail mount. The LE321R-FDE is powered by a single CR123 battery, providing a runtime of up to 5,000 hours. The rear-positioned selector switch allows the user to choose between: Visible Low, Visible High, IR High, IR Illuminator, or IR High with IR Illuminator - each can be activated via the included remote pressure switch - or to turn the device off. The LE321R-FDE also features a top-positioned activation button and tactile windage and elevation adjustments for precise zeroing. Multi-laser device with coaxial green visible laser pointer & IR laser and IR illuminator LED white light flash light Rear side focusing knob Quick release mount Waterproofed remote cable switch High precision aiming system: Visible red laser, IR laser (Class 2), and IR illuminator for maximum accuracy day and night. Integrated white light: Powerful lamp for quick target acquisition and optimal visibility in low-light conditions. Ultra-rugged housing in FDE color: Made from high-quality Grade-5 titanium with quick-release Picatinny mount for secure fit and light weight. Long operational life: Up to 5,000 hours of runtime with just one CR123 battery. Tactical operation: Rear selector switch with multiple operating modes, precise elevation and windage adjustment, as well as include a remote pressure switch. Delivery Content Holosun LE321R-FDE CR123A Industrial Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen wrench) Lens cleaning cloth User manual Warranty brochure insert Main Data EAN: 4055132040055 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Operating Temperature: -40°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 0.7 mW Laser Class: 3R Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 91x74x41 mm Material: 7075 Aluminium Housing Color: Flat Dark Earth Weight: 300 g Protection Class: IP 67 Shop+Web Delivery Content: Holosun LE321R-FDE CR123A Industrial Lithium Battery, 3V 1400mAh Remote cable switch Adjustment tool (e.g. Allen wrench) Lens cleaning cloth User manual Warranty brochure insert Holosun Style: Aiming Mounting type: QD High riser mount: no Battery compartement: Seitlich Solar cell: no Automatic brightness adjustment: no rifle sight: yes Shake Awake - Function: no Memory function: no Surface finish: MAO W&E Range: ± 60 MOA Vibration strength: 1000 G Flip cap type: yes Killflash: no Light sources: LED + Laser BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 800 lum Laser illuminator wavelength: 830 nm Accessesories Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Note for Orders in Germany: Please note: Before shipping, we will verify the validity of your BKA exemption permit. Send it to us via email along with your order number after placing your order. Shipping can only occur after successful verification. Important! Regulated Item! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and requirements in many European countries. You can only purchase this regulated item if you possess the corresponding acquisition permission. It is the sole responsibility of the user to inform themselves about the applicable regulations in their country before purchasing or using the item and to comply with them. Consult your relevant authority! The P.ID-HC is a compact, powerful laser/light module designed for the positive identification of threats in low or no light conditions. The P.ID-HC can be mounted on any firearm with a MIL-STD-1913 Picatinny rail and comes with universal adapters for increased compatibility. The housing of the P.ID-HC is milled from 7075 aluminum and anodized for enhanced durability. The P.ID-HC offers 800 / 400 lumens and 42,000 / 21,000 candela in high/low mode and up to 60 minutes of battery life in low mode. The P.ID-HC is powered by a flat-top 18350 battery (included) and can be charged without removal using the supplied magnetic USB charging cable. Use only the recommended battery type! Using other battery types may cause damage. Maximum light output: 800 lumens and up to 42,000 candelas ensure outstanding illumination and range. Two lighting modes: High/Low mode with 800/400 lumens for flexible adjustment to any situation. Robust construction: Milled 7075 aluminum housing with anodized surface for maximum durability. Long Battery Life & Comfort: Up to 60 minutes of runtime in low mode with a rechargeable 18350 battery and magnetic USB charging cable. Universally compatible: Fits all MIL-STD-1913 Picatinny rails, including an adapter for versatile mounting options. Delivery Content Holosun P.ID-HC Adjustment tool (e.g., Allen wrench) Lens cleaning cloth User manual Warranty brochure insert Main Data EAN: 4055132040116 Warranty: 3 years Customs tariff number: 85131000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery count: 1 Mechanical Parameters Size: 81x36x30 mm Material: 7075 Aluminium Housing Color: black Weight: 28 g Protection Class: IP X8 Shop+Web Delivery Content: Holosun P.ID-HC Adjustment tool (e.g., Allen wrench) Lens cleaning cloth User manual Warranty brochure insert Holosun pistol sight: yes Light sources: LED BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 1,000 lum Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we check the validity of your BKA exemption permit. Send it to us by email after your order, including your order number. Shipping can only occur after successful verification. Important! Item subject to authorization! Legal Notice: Acquisition in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations in many countries in Europe. You can only purchase this item, which requires authorization, if you have the appropriate acquisition permit. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchasing or using the item. Consult your responsible authority! The P.ID-K sets a new standard for compact light modules, delivering exceptional performance in a small housing. This powerful light module produces 500 lumens / 6,500 candela in high mode and 250 lumens / 3,000 candela in low mode, thus ensuring positive target identification in low light conditions. The P.ID-K is powered by either the included USB-C rechargeable 16340 Li-Ion battery or a CR123A battery, providing flexibility and convenience. Its adjustable universal mounting system allows the light module to be moved forward or backward to achieve an optimal fit and compatibility with a broader range of pistols. These include, but are not limited to: Glock G45, G43X MOS, G48 MOS, G19, G47, Springfield Hellcat & Hellcat Pro, Smith & Wesson M&P 2.0, Shadow Systems MR920, HK VP9SK, Taurus G3c, Staccato C2 DUO, SIG P365 X-Macro, and others. Compatible with most TRL7 holster types. Strong light output: 500 lumens / 6,500 candela (High) and 250 lumens / 3,000 candela (Low) for clear visibility and precise target identification. Flexible power supply: Can be operated with a rechargeable 16340 Li-Ion battery (USB-C) or a CR123A battery. Universal fit: Adjustable mounting system for optimal positioning and compatibility with a variety of modern pistols. Compact Design: Maximum performance with minimal space requirements - ideal for concealed carrying or compact setups. High holster compatibility: Fits most TRL7 holster models and common pistol platforms such as Glock, SIG, HK, Springfield, and many more. Delivery Content Holosun P.ID-K CR123A Industrial Lithium Battery, 3V 1400mAh Tool for adjustment (e.g., Allen wrench) Lens cleaning cloth User manual Warranty brochure enclosure Main Data EAN: 4055132039486 Warranty: 3 years Customs tariff number: 85131000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Industrial Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 66x36x30 mm Material: 7075 Aluminium Housing Color: black Weight: 28 g Protection Class: IP X8 Shop+Web Delivery Content: Holosun P.ID-K CR123A Industrial Lithium Battery, 3V 1400mAh Tool for adjustment (e.g., Allen wrench) Lens cleaning cloth User manual Warranty brochure enclosure Holosun pistol sight: yes Light sources: LED BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 1,000 lum Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important notice for orders in Germany: Please note: Before shipping, we will check the validity of your BKA exemption permit. Send it to us via email with your order number after placing your order. Shipping can only occur after successful verification. Important! Permitted article! Legal notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, installation, and use of this device are subject to legal regulations and restrictions in many countries in Europe. You can only purchase this permitted article if you have the appropriate purchase authorization. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before acquisition or use. Consult your relevant authority! The Holosun P.ID-K-PLUS sets new standards for compact light modules, offering a combination of performance and precision. Equipped with a powerful lamp that delivers an impressive 1,000 lumens and 10,000 candela, the P.ID-K-PLUS ensures optimal visibility in low-light conditions. The P.ID-K-PLUS features newly designed activation switches that have been ergonomically optimized to guarantee faster and more intuitive operation. With its compact dimensions, the P.ID-K-PLUS fits perfectly with most compact handguns. In addition to these improvements, a visible green laser enhances target acquisition. Two-in-one aiming aid: Powerful white light plus visible green laser - can be used individually or simultaneously (Plus Mode) for flexible deployment options. Versatile Operation: White light and laser functions can be activated independently via separate WL/VIS buttons; in Plus Mode, both buttons simultaneously activate light and laser. Robust & universal: Housing made from 7075 aluminum, CNC-milled and hard anodized; fits any MIL-STD-1913 (Picatinny) rail - adapter included for maximum compatibility. Performance Data & Runtime: 1,000 Lumens and 10,000 Candela (High/Low) with up to 60 minutes runtime in Low mode. Practical power supply: Includes flat-top 18350 battery; magnetic USB charging cable allows charging without removing the battery. Delivery Content Holosun P.ID-K-PLUS Tool for adjustment (e.g., Allen wrench) Lens cleaning cloth User manual Accompanying warranty brochure Main Data EAN: 4055132040109 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Laser Class: 3R Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery count: 1 Mechanical Parameters Size: 66x36x30 mm Material: 7075 Aluminium Housing Color: black Weight: 28 g Protection Class: IP X8 Shop+Web Delivery Content: Holosun P.ID-K-PLUS Tool for adjustment (e.g., Allen wrench) Lens cleaning cloth User manual Accompanying warranty brochure Holosun pistol sight: yes Light sources: LED BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 1,000 lum Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will verify your BKA exemption permit for validity. After placing your order, send it to us via email including your order number. Shipping can only proceed after a successful verification. Important! Item requires a permit! Legal Notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and requirements in many European countries. You can only purchase this item, which requires a permit, if you possess the appropriate acquisition authorization. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchasing or using the device. Consult your relevant authority! The P.ID Plus is a compact laser/light module for active target acquisition, combined with a powerful white light for positive threat identification in poor or no light conditions. The P.ID Plus can be mounted on any firearm with a MIL-STD-1913 Picatinny rail and comes with universal adapters for greater compatibility. The housing of the P.ID Plus is machined from 7075 aluminum and anodized for increased durability. The P.ID Plus features high-performance white light and a visible green laser, which can be activated independently via the WL or VIS activation buttons, or simultaneously in Plus Mode, where both – white light and green laser – are turned on by pressing any activation button. The P.ID Plus offers 900/450 lumens and 20,000/10,000 candela in High/Low Mode, and up to 60 minutes of battery life in Low Mode. The P.ID Plus is powered by a flat-top 18350 battery (included) and can be charged without removal using the provided magnetic USB charging cable. Use only the recommended battery type! Using other battery types may cause damage. Two-in-one aiming aid: Powerful white light plus visible green laser - can be used individually or simultaneously (Plus Mode) for flexible deployment options. Versatile operation: White light and laser functions can be activated independently through separate WL / VIS buttons; in Plus Mode, both buttons activate light and laser simultaneously. Robust & universal: Housing made of 7075 aluminum, CNC-milled and hard anodized; fits any MIL-STD-1913 (Picatinny) rail - adapter for maximum compatibility included. Performance Data & Runtime: 900 / 450 Lumens and 20,000 / 10,000 Candela (High / Low) with up to 60 minutes runtime in Low mode. Practical power supply: Includes flat-top 18350 battery; magnetic USB charging cable allows charging without removing the battery. Delivery Content Holosun P.ID-PLUS Tool for adjustment (e.g., Allen key) Lens cleaning cloth User manual Included warranty brochure Main Data EAN: 4055132020880 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optical Power: 5 mW Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery count: 1 Mechanical Parameters Size: 90x36x30 mm Material: 7075 Aluminium Housing Color: black Weight: 128 g Protection Class: IP X8 Shop+Web Delivery Content: Holosun P.ID-PLUS Tool for adjustment (e.g., Allen key) Lens cleaning cloth User manual Included warranty brochure Holosun pistol sight: yes Light sources: LED BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 900 lum Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will verify the validity of your BKA special permit. Send it to us via email after placing your order, including your order number. Shipping can only occur after successful verification. Important! Licensed Item! Legal Notice: Acquisition in Germany is only possible with a BKA special permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations and rules in many European countries. You can only purchase this licensed item if you possess the appropriate acquisition permit. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchasing or using the item. Consult your competent authority! The RAID (Rifle Area Illumination Device) is a completely new, powerful light module for long guns that combines strong illumination and versatile user guidance. The RAID offers 80,000 candela and 1,000 lumens for target identification at greater distances. The RAID is activated via the included, compact external switch or the integrated tail cap switch. Mounting on Picatinny rails or M-LOK is factory-equipped, and the single USB-C rechargeable 18650 battery is also included. The housing is made of ultra-durable 7075 aluminum, is IP68 dust and waterproof, and withstands 1000 g shock loads. Extreme luminosity: 1,000 lumens and an impressive 80,000 candela for maximum range and precise target identification at long distances. Flexible Operation: Activation optionally via the integrated tail cap switch or the compact, included remote switch. Versatile mounting: Compatible with Picatinny and M-LOK systems - ready to use straight out of the box. Powerful energy supply: Includes rechargeable 18650 battery (USB-C) for reliable runtime and easy handling. Extremely robust: Machined 7075 aluminum housing, IP68 dust & waterproof and shockproof up to 1000 g - built for the toughest applications. Delivery Content Holosun RAID CR123A Lithium Battery, 3V 1400mAh M-LOK Mount Single Button Crane Port Pressure Switch Adjustment Tool (e.g., Allen Wrench) Lens Cleaning Cloth User Manual Enclosed Warranty Brochure Main Data EAN: 4055132033477 Warranty: 3 years Customs tariff number: 85131000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: CR123A Lithium Battery, 3V 1400mAh Battery count: 1 Mechanical Parameters Size: 81x50x34 mm Material: 7075 Aluminium Housing Color: black Weight: 150 g Protection Class: IP X8 Shop+Web Delivery Content: Holosun RAID CR123A Lithium Battery, 3V 1400mAh M-LOK Mount Single Button Crane Port Pressure Switch Adjustment Tool (e.g., Allen Wrench) Lens Cleaning Cloth User Manual Enclosed Warranty Brochure Holosun rifle sight: yes Light sources: LED BKA exception: yes LED illuminator: yes LED illumniator wavelength: White LED illuminator power: 1,000 lum Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important Notice for Orders in Germany: Please note: Before shipping, we will check the validity of your BKA special permit. Send it to us via email after your order, including your order number. Shipping can only proceed after successful verification. Important! Item requiring a permit! Legal Notice: Acquisition in Germany is only possible with a BKA special permit. The acquisition, possession, assembly, and use of this device are subject to legal regulations in many European countries. You can only acquire this item, which requires a permit, if you possess the appropriate purchase authorization. It is the sole responsibility of the user to inform themselves about and comply with the applicable regulations in their country before purchasing or using the product. Consult your relevant authority! The RML-GR (Rail Mounted Laser) is a laser targeting device with a visible green laser, designed for pistol applications. The RML-GR features a robust polymer housing and is powered by a CR1/3N lithium battery. It has ambidextrous activation buttons and comes with universal adapter inserts for more compatibility. The RML-GR is certified waterproof and dustproof to IP68 standards and has a robust adjustment mechanism for windage and elevation correction with tactile clicks for excellent zero retention under recoil. Additionally, it is compatible with many holsters for weapon lights. Powerful green laser: Targeting device for quick and precise target acquisition at medium and long distances. Extremely robust polymer housing, for maximum stability. Precise adjustment: Windage and elevation adjustment for accurate aiming and perfect point of impact. Easy Operation: Side-Mounted Selector Switches Delivery Content Holosun RML-GR Lithium Batt CR1/3N 170mAH 3V for Pointer Tool for adjustment (e.g., Allen key) Lens cleaning cloth User manual Enclosed warranty brochure Main Data EAN: 4055132040086 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Beam Shape: Dot Optical Power: 5 mW Laser Class: 3R Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: Lithium Batt CR1/3N 170mAH 3V for Pointer Battery count: 1 Mechanical Parameters Size: 50x30x23 mm Material: Polymer Housing Color: black Weight: 37 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun RML-GR Lithium Batt CR1/3N 170mAH 3V for Pointer Tool for adjustment (e.g., Allen key) Lens cleaning cloth User manual Enclosed warranty brochure Holosun pistol sight: yes BKA exception: yes Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]

Important notice for orders in Germany: Please note: Before shipping, we will check your BKA exemption permit for validity. Please send it to us via email after your order, including your order number. Shipping can only proceed after successful verification. Important! Item subject to permission! Legal notice: Purchase in Germany is only possible with a BKA exemption permit. The acquisition, possession, assembly, and use of this device is subject to legal regulations in many European countries. You can only purchase this item requiring permission if you possess the appropriate acquisition permit. It is the sole responsibility of the user to inform themselves about the applicable regulations in their country before purchasing or using it and to comply with them. Consult your competent authority! The RML-RD (Rail Mounted Laser) is a laser aiming device with a visible red laser, designed for pistol applications. The RML-RD features a robust polymer housing and is powered by a CR1/3N lithium battery. It has ambidextrous activation buttons and comes with universal adapter inserts for more compatibility. The RML-RD is certified waterproof and dustproof according to IP68 standards and possesses a robust adjustment mechanism for windage and elevation correction with tactile clicks for excellent zero retention under recoil. Additionally, it is compatible with many holsters for weapon lights. Powerful red laser: Targeting device for quick and precise targeting at medium and long distances. Extremely robust polymer housing, for maximum stability. Precise adjustment: Windage and elevation adjustments for exact zeroing and perfect point of impact. Easy operation: Side-mounted selector switches Delivery Content Holosun RML-RD Lithium Batt CR1/3N 170mAH 3V for Pointer Tool for adjustment (e.g., Allen key) Lens cleaning cloth User manual Warranty leaflet brochure Main Data EAN: 4055132040062 Warranty: 3 years Customs tariff number: 90132000000 Technical Parameters Lifetime: > 5,000 h Operating Temperature: -10°C - 50 °C Storage Temperature: -40°C - 70 °C Optical Parameters Beam Shape: Dot Optical Power: 5 mW Laser Class: 3R Optics: glass lens AR coated Electrical Parameters Operating Voltage: 3 V DC Battery: Lithium Batt CR1/3N 170mAH 3V for Pointer Battery count: 1 Mechanical Parameters Size: 50x30x23 mm Material: Polymer Housing Color: black Weight: 37 g Protection Class: IP 68 Shop+Web Delivery Content: Holosun RML-RD Lithium Batt CR1/3N 170mAH 3V for Pointer Tool for adjustment (e.g., Allen key) Lens cleaning cloth User manual Warranty leaflet brochure Holosun pistol sight: yes BKA exception: yes Accessesories Certified laser safety glasses PICO-LPG-405-532 according to DIN EN 207, suitable wavelength range >400 - 532 nm, comfortable fit over glasses or alone, side protection for a wide field of vision, for laser welding, laser cutting, laser marking, for cosmetic applications. Picotronic accessory PICO-LENS-CLEANING-PEN-MICRO Product Safety Information Manufacturer Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected] Responsible Economic Operator Picotronic GmbH Rudolf-Diesel-Str.2a 56070 Koblenz Deutschland [email protected]